Journal Description
Methane
Methane
is an international, peer-reviewed, open access journal on all aspects of methane published quarterly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 17.3 days after submission; acceptance to publication is undertaken in 9.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: APC discount vouchers, optional signed peer review, and reviewer names published annually in the journal.
Latest Articles
Photoperiod Regulates Aerobic Methane Emissions by Altering Plant Growth and Physiological Processes
Methane 2024, 3(3), 380-396; https://doi.org/10.3390/methane3030021 (registering DOI) - 28 Jun 2024
Abstract
Previous studies have shown that light quality and quantity affect methane emissions from plants. However, the role of photoperiod in plant-derived methane has not been addressed. We studied the effects of two photoperiods—long-day (16 h light/8 h dark), and short-day (8 h light/16
[...] Read more.
Previous studies have shown that light quality and quantity affect methane emissions from plants. However, the role of photoperiod in plant-derived methane has not been addressed. We studied the effects of two photoperiods—long-day (16 h light/8 h dark), and short-day (8 h light/16 h dark)—on growth and methane emissions of lettuce (a long-day plant), mung bean (a short-day plant), and tomato (a day-neutral plant) under a temperature regime of 22/18 °C. All species were grown under both light durations. First, seeds were germinated in Petri dishes for one week, then plants were transferred to pots and randomly assigned to one of the two experimental conditions. Under each condition, twelve plants were grown for 21 days; at that time, plant growth and physiological traits, including plant dry mass, growth index, photosynthesis, chlorophyll fluorescence, total chlorophyll, nitrogen balance index, flavonoids, and anthocyanin, were measured. Lettuce plants under the short-day photoperiod had the highest methane emissions. Long-day plants that were exposed to short-day conditions and short-day plants that were exposed to long-day conditions were stressed; day-neutral plants were also stressed under short days (p< 0.05). All three species had decreased total dry mass under short-day conditions, most likely because of decreased photosynthesis and increased transpiration and stomatal conductance. Methane emission was positively correlated with shoot/root mass ratio, nonphotochemical quenching and anthocyanin; but was negatively correlated with stem height, dry mass, photosynthesis, water-use efficiency, total chlorophyll, and flavonoids (p < 0.05). This study revealed that, besides light intensity and quality, light duration can also affect methane emissions from plants.
Full article
Open AccessFeature PaperReview
Recent Advances in the Use of Controlled Nanocatalysts in Methane Conversion Reactions
by
Felipe Anchieta e Silva and Thenner Silva Rodrigues
Methane 2024, 3(2), 359-379; https://doi.org/10.3390/methane3020020 - 11 Jun 2024
Abstract
►▼
Show Figures
This study investigates the utilization of controlled nanocatalysts in methane conversion reactions, addressing the pressing need for the efficient utilization of methane as a feedstock for valuable chemicals and clean energy. The methods employed include a comprehensive review of recent advancements in nanocatalyst
[...] Read more.
This study investigates the utilization of controlled nanocatalysts in methane conversion reactions, addressing the pressing need for the efficient utilization of methane as a feedstock for valuable chemicals and clean energy. The methods employed include a comprehensive review of recent advancements in nanocatalyst synthesis, characterization, and application, as well as the critical analysis of underlying mechanisms and controversies in methane activation and transformation. The main findings reveal significant progress in the design and synthesis of controlled nanocatalysts, enabling enhanced activity, selectivity, and stability in methane conversion reactions. Moreover, the study highlights the importance of resolving controversies surrounding metal–support interactions for rational catalyst design. Overall, the study underscores the pivotal role of nanotechnology in shaping the future of methane utilization and sustainable energy production, providing valuable insights for guiding future research directions and technological developments in this field.
Full article
Figure 1
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Open AccessArticle
Dry Reforming of CH4 Using a Microreactor
by
Tarsida N. Wedraogo, Jing Wu and Huai Z. Li
Methane 2024, 3(2), 346-358; https://doi.org/10.3390/methane3020019 - 3 Jun 2024
Abstract
►▼
Show Figures
In the present study, a comparison of the dry reforming of a gas mixture containing methane, carbon dioxide and nitrogen without contaminants to a ruthenium-based Ru/Al2O3 catalyst was carried out in a microreactor for the first time. The influence of
[...] Read more.
In the present study, a comparison of the dry reforming of a gas mixture containing methane, carbon dioxide and nitrogen without contaminants to a ruthenium-based Ru/Al2O3 catalyst was carried out in a microreactor for the first time. The influence of the contact time, temperature and composition of the feed on the conversion was exhaustively investigated. The optimal operating conditions were found to be a contact time of 80 milliseconds, a temperature of 700 °C and a CH4:CO2 ratio of 1. The assessment of diffusional limitations reveals that there is no resistance to mass transfer, which reveals the potential benefit of the determination of intrinsic reaction kinetics within a microreactor.
Full article
Figure 1
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 8 Cont.
Open AccessArticle
A Study on the Heterogeneity and Anisotropy of the Porous Grout Body Created in the Stabilization of a Methane Hydrate Reservoir through Grouting
by
Yuchen Liu and Masanori Kurihara
Methane 2024, 3(2), 331-345; https://doi.org/10.3390/methane3020018 - 21 May 2024
Abstract
►▼
Show Figures
To solve the sand problem during the depressurization of methane hydrate (MH), we proposed a method to build a porous grout body with sufficient permeability and strength around the wellbore through inhibitor pre-injection and grouting, and verified its effectiveness and potential in our
[...] Read more.
To solve the sand problem during the depressurization of methane hydrate (MH), we proposed a method to build a porous grout body with sufficient permeability and strength around the wellbore through inhibitor pre-injection and grouting, and verified its effectiveness and potential in our previous research using artificial cores created with silica sand and alternative hydrates such as TBAB- hydrate and iso-butane hydrate. However, all of the artificial cores mentioned above were created with high homogeneity, injected, cured, and had their physical properties measured in the vertical direction, which differs from real reservoir conditions. To investigate the effects of grouting in a more realistic fluid flow, we conducted further experiments using horizontal 1D cores, 1D cubic models, and a 2D cross-sectional model mimicking the near wellbore. These experiments revealed that (1) the generated gas somewhat suppressed the effects of grouting as in the case of previous experiments, and (2) grouted reservoirs would be heterogenous and anisotropic due to the fluid densities and the distribution of grout particles and turbidite sediments, but sufficient permeability and satisfactory strength could still be attained. The above series of experiments demonstrated that our method has the potential to effectively produce actual MH, preventing sand problems even in heterogeneous and anisotropic grouted reservoirs.
Full article
Figure 1
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 11 Cont.
Figure 12
Open AccessArticle
Methane Production from Sugarcane Vinasse Biodigestion: An Efficient Bioenergy and Environmental Solution for the State of São Paulo, Brazil
by
Letícia Rodrigues de Melo, Bruna Zerlotti Demasi, Matheus Neves de Araujo, Renan Coghi Rogeri, Luana Cardoso Grangeiro and Lucas Tadeu Fuess
Methane 2024, 3(2), 314-330; https://doi.org/10.3390/methane3020017 - 20 May 2024
Abstract
This study mapped the bioenergy production from sugarcane vinasse according to the mesoregions of the State of São Paulo (SP), Brazil, assessing the magnitude of biogas-derived electricity and biomethane production and estimating the greenhouse gas (GHG) emissions. SP holds 45% of the Brazilian
[...] Read more.
This study mapped the bioenergy production from sugarcane vinasse according to the mesoregions of the State of São Paulo (SP), Brazil, assessing the magnitude of biogas-derived electricity and biomethane production and estimating the greenhouse gas (GHG) emissions. SP holds 45% of the Brazilian ethanol-producing plants, in which 1.4 million m3 of carbon-rich vinasse are generated daily. The electricity generated from vinasse has the potential to fully supply the residential consumption (ca. 6.5 million inhabitants) in the main sugarcane-producing mesoregions of the state (Ribeirão Preto, São José do Rio Preto, Bauru, Araçatuba and Presidente Prudente). In another approach, biomethane could displace almost 3.5 billion liters of diesel, which represents a 26% abatement in the annual state diesel consumption. Energetically exploiting biogas is mandatory to prevent GHG-related drawbacks, as the eventual emission of methane produced under controlled conditions (261.2 × 106 kg-CO2eq d−1) is ca. 7-fold higher than the total emissions estimated for the entire ethanol production chain. Meanwhile, replacing diesel with biomethane can avoid the emission of 45.4 × 106 kg-CO2eq d−1. Implementing an efficient model of energy recovery from vinasse in SP has great potential to serve as a basis for expanding the utilization of this wastewater in Brazil.
Full article
(This article belongs to the Special Issue Trends in Methane-Based Biotechnology)
►▼
Show Figures
Figure 1
Figure 3
Figure 4
Figure 5
Open AccessReview
Methane Advances: Trends and Summary from Selected Studies
by
Stephen Okiemute Akpasi, Joseph Samuel Akpan, Ubani Oluwaseun Amune, Ayodeji Arnold Olaseinde and Sammy Lewis Kiambi
Methane 2024, 3(2), 276-313; https://doi.org/10.3390/methane3020016 - 1 May 2024
Abstract
►▼
Show Figures
The role of methane (CH4) in the 21st century presents a critical dilemma. Its abundance and clean-burning nature make it a promising energy source, while its potent greenhouse effect threatens climate stability. Despite its potent greenhouse gas (GHG) nature, CH4
[...] Read more.
The role of methane (CH4) in the 21st century presents a critical dilemma. Its abundance and clean-burning nature make it a promising energy source, while its potent greenhouse effect threatens climate stability. Despite its potent greenhouse gas (GHG) nature, CH4 remains a crucial energy resource. However, advancements in CH4 capture, utilization, and emissions mitigation are rapidly evolving, necessitating a critical assessment of the advances, their potential, and challenges. This study aims to comprehensively evaluate the current state of the art in these advancements, particularly focusing on the emissions trends, with corresponding global warming potentials of projected CH4 emissions, and a discussion on the advances that have been made towards reducing the impacts of CH4 emissions. The areas of these advances include measurement, computational, numerical modeling, and simulation studies for CH4, emerging technologies for CH4 production, management and control, the nexus of CH4 –X, and case study applications in countries. This study reports on these advances, which involves a technical review of studies, mainly from the last decade, discussing the technical feasibility, economic viability, and environmental impact of these advancements. Our trend analysis reveals that even though the share of CH4 in the GHG mix has been around 19% compared with carbon dioxide (CO2), still, CH4 reduction would need to be highly subsidized because of the high global warming potential it has, compared with CO2. We conclude that while significant progress has been made, further research and development are essential to optimize the performance, scalability, and affordability of these advancements. Additionally, robust policy frameworks and international collaborations are crucial to ensure widespread adoption and maximize the potential that comes with the advancements in the mitigation of the impact of CH4 emission. This study contributes to the ongoing dialogue on balancing the potentials of CH4 with its environmental footprint, paving the way for a future where this versatile resource can be utilized sustainably.
Full article
Figure 1
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Open AccessFeature PaperArticle
Fungal Methane Production Controlled by Oxygen Levels and Temperature
by
Moritz Schroll, Katharina Lenhart, Thomas Bender, Piet Hötten, Alexander Rudolph, Sven Sörensen and Frank Keppler
Methane 2024, 3(2), 257-275; https://doi.org/10.3390/methane3020015 - 19 Apr 2024
Abstract
►▼
Show Figures
Saprotrophic fungi, key players in global carbon cycling, have been identified as methane (CH4) sources not yet accounted for in the global CH4 budget. This study, for the first time, explores the influence of oxygen (O2) and temperature
[...] Read more.
Saprotrophic fungi, key players in global carbon cycling, have been identified as methane (CH4) sources not yet accounted for in the global CH4 budget. This study, for the first time, explores the influence of oxygen (O2) and temperature on CH4 production by two fungi, Laetiporus sulphureus and Pleurotus sapidus. To explore the relationship between these parameters and fungal CH4 formation, we examined CH4 formation under varying O2 levels (0 to 98%) and temperatures (17, 27, and 40 °C) during fungal growth on pine wood, beech wood, and grass under sterile conditions. Our findings show that fungal CH4 formation strongly depends on O2 levels. Methane formation was highest when O2 levels exceeded 5%, whilst no CH4 formation was observed after complete O2 consumption. Reintroducing O2 immediately resumed fungal CH4 production. Methane formation normalized to O2 consumption (CH4_norm) showed a different pattern. L. sulphureus showed higher CH4_norm rates with higher O2 levels, whereas P. sapidus showed elevated rates between 0 and 5%. Temperature also significantly influenced CH4 and CH4_norm rates, with the highest production at 27 °C, and comparatively lower rates at 17 and 40 °C. These findings demonstrate the importance of O2 levels and temperature in fungal CH4 emissions, which are essential for refining CH4 source predictions.
Full article
Figure 1
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7